Product Description
The feature of electric office desk is the adjustable height of the desktop.
According to the request of the user in the actual using, the office desk can be adjusted into different height.
It has the location memory to the prefer location which the user are used to. If the height is adjusted by other user,
You just need to press 1 memory button and then the height will be back to the original one.
It is very convenient and saves time for the user.
1. Input voltage: 110V/220V AC 50/60Hz;
2. Output voltage: 24V DC;
3. The stroke: 500mm ();
4. Max load capacity: 2000N;
5. No load speed: 23mm/s;
6. Type of duty: 10%.
1. Button “UP1” and Button “DN1” are to control the lifting up and down of the office desk(self lock). Pressing button up1 and loose the finger, the office desk will lift up automatically. Pressing button DN1 at 1 time and loose the finger, the office desk will lift down automatically. It will stop when you press 1 of the button “UP1”, “UP2”, “DN1”, “DN2” in the process of automatically lifting up or down. (as pic 2)
2. Button “UP2”, “DN2” are to control the office desk up and down. Pressing button UP2, the desk will lift up and it will stop when you loose the finger. Pressing button DN2, the desk will lift down and will stop when you loose the finger. (as pic 2). (DN2 has the reset function too at the same time).
3. Reset button DN2 is used when the synchronous work of the office desk has the bigger accumulative tolerance and work abnormally. Pressing DN2 and not moving the finger, the desk will lift down all the time to the bottom. And then do not move your finger and keep pressing for 5 seconds, the office desk will have the rebound action which is up 5mm. It is a successful reset.
4. Memory button S need to work together with location key 1, 2, 3, 4. Firstly you need to set the memory location, for example when the desk lift up to 100mm location, you
Should press Key S and location button 1 at the same time. When the desk lift up to 200mm, press key S and button 2 at the same time. When the desk lift up to 300mm, press S and 3 at the same time. When the desk lift up to 400mm, press S and 4 at the same time. When we set well the location memory, we could use them. For example, when the desk is at any location, press button 1, the desk will be back to 100mm location. Press button 3, it is back to 300mm.
5. Digital display. When the desk lift up and down, the digital display will show the detail location and some code when the desk is in some special situation.
6. Used protection. When the desk work 3 minutes continuously, it will stop work automatically, and back to normal state after 999 seconds. Digital display will show “hot” code and count down 999 seconds. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Style: | Modern |
|---|---|
| Material: | Metal |
| Wood Style: | Panel |
| Input Voltage: | 110V/220VAC |
| Frequency: | 50-60Hz |
| Output Voltage: | DC24V |
| Samples: |
US$ 95/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How do motor bases contribute to ease of maintenance for electric motors?
Motor bases play a significant role in facilitating ease of maintenance for electric motors. Here’s a detailed explanation:
1. Accessibility: Motor bases provide easy access to the motor for maintenance purposes. They offer a stable and secure platform that allows technicians to reach the motor quickly and perform routine tasks such as inspection, cleaning, lubrication, and belt adjustments. Motor bases with open designs or removable covers further enhance accessibility by providing unobstructed access to critical motor components.
2. Adjustability: Many motor bases are adjustable, allowing for precise positioning and alignment of the motor. This adjustability simplifies maintenance procedures as it enables technicians to align the motor shaft with the driven equipment accurately. Proper alignment helps reduce wear, vibration, and energy loss, ultimately improving the motor’s performance and extending its lifespan.
3. Vibration Reduction: Motor bases often incorporate features that help dampen vibrations generated by the motor. Excessive vibrations can lead to premature wear and damage to both the motor and surrounding equipment. Motor bases equipped with vibration isolation pads or mounts absorb and dissipate vibrations, reducing stress on the motor and minimizing the need for frequent maintenance or repairs.
4. Easy Removal and Replacement: In some situations, it may be necessary to remove the motor from its base for more extensive maintenance or repairs. Motor bases are designed to facilitate the removal and replacement of motors as needed. They typically provide mounting features that allow for straightforward disconnection and reconnection of the motor, saving time and effort during maintenance activities.
5. Documentation and Labeling: Motor bases often include labeling or documentation areas where relevant information can be recorded. This documentation can include motor identification details, installation dates, maintenance schedules, and torque specifications. Having this information readily available on the motor base simplifies maintenance planning, tracking, and troubleshooting.
6. Compatibility with Accessories: Motor bases are often designed to be compatible with various accessories that aid in maintenance. These accessories may include cable management systems, drip pans for fluid containment, or mounting brackets for additional components. The compatibility of the motor base with such accessories enhances ease of maintenance by providing integrated solutions that support efficient and organized maintenance practices.
By incorporating these features and considerations, motor bases contribute to the ease of maintenance for electric motors. They provide accessibility, adjustability, vibration reduction, and easy removal options, simplifying routine maintenance tasks and ensuring the smooth operation and longevity of electric motors.
Where can individuals find reliable information about choosing and installing motor bases?
Individuals looking for reliable information about choosing and installing motor bases can explore the following sources:
1. Manufacturer’s Documentation: Motor manufacturers often provide detailed documentation, including product catalogs, datasheets, and installation guides. These resources offer valuable information about their motor bases, including specifications, compatibility, installation requirements, and maintenance guidelines. Manufacturers’ websites are a good starting point to access this documentation.
2. Industry Associations and Standards Organizations: Industry associations and standards organizations such as the National Electrical Manufacturers Association (NEMA) and the International Electrotechnical Commission (IEC) publish guidelines, standards, and best practices related to motors and motor bases. Their websites and publications can provide valuable insights into motor base selection, installation, and compliance with industry standards.
3. Technical Literature and Journals: Technical literature and journals focusing on electrical engineering, mechanical engineering, or industrial automation often cover topics related to motors and motor bases. These publications feature articles, research papers, and case studies that can provide in-depth knowledge about motor base technology, advancements, and installation techniques.
4. Online Resources and Forums: Online resources such as websites, forums, and discussion boards dedicated to motors and motor-related topics can be valuable sources of information. Websites of motor manufacturers, industry blogs, and engineering forums often have sections or threads discussing motor base selection, installation tips, and best practices. Participating in these online communities can also allow individuals to ask specific questions and seek advice from industry professionals.
5. Consulting with Experts: Consulting with experts in the field, such as motor manufacturers, suppliers, or experienced engineers, can provide personalized guidance and recommendations. These experts can offer insights based on their industry knowledge, experience, and familiarity with specific motor applications. They can help individuals navigate the selection process, address installation challenges, and ensure proper motor base integration.
It’s important to cross-reference information from multiple sources to ensure accuracy and reliability. Motor bases play a critical role in motor performance and efficiency, and selecting the right base requires careful consideration of factors such as motor type, size, load requirements, environmental conditions, and alignment needs.
By leveraging the information from reliable sources and seeking expert advice when needed, individuals can make informed decisions when choosing and installing motor bases, resulting in optimal motor performance and longevity.
Can motor bases be used for both horizontal and vertical motor installations?
Yes, motor bases can be used for both horizontal and vertical motor installations, depending on the design and configuration of the motor base. Here’s a detailed explanation:
Motor bases are versatile components that provide a stable mounting platform for electric motors in various orientations. The suitability of a motor base for horizontal or vertical motor installations depends on the specific design features of the base. Here are some considerations:
1. Adjustable Mounting Slots: Many motor bases feature adjustable mounting slots that allow for flexibility in positioning the motor. These slots enable technicians to mount the motor in either a horizontal or vertical orientation by adjusting the position of the mounting bolts. Adjustable mounting slots provide versatility and allow for easy adaptation to different installation requirements.
2. Rotatable Base Plates: Some motor bases are designed with rotatable base plates that can be repositioned to accommodate both horizontal and vertical installations. These bases often have multiple sets of mounting holes or slots on different sides of the base plate, allowing for easy reorientation of the motor. By rotating the base plate, the motor can be securely mounted in the desired orientation.
3. Specific Base Design: Certain motor bases are specifically designed for either horizontal or vertical installations. These bases have fixed mounting patterns or configurations that align with the intended motor orientation. For example, vertical motor bases may have a taller or elongated design to provide proper support and stability when the motor is installed vertically.
It’s important to note that not all motor bases are suitable for both horizontal and vertical installations. Some motor bases may be designed exclusively for either horizontal or vertical orientations due to their specific structural features or limitations. Therefore, it’s essential to consult the manufacturer’s guidelines and specifications to ensure that a particular motor base is appropriate for the desired installation orientation.
In summary, motor bases can be used for both horizontal and vertical motor installations, depending on the design and configuration of the base. Adjustable mounting slots, rotatable base plates, and specific base designs are some of the features that enable motor bases to accommodate different installation orientations. However, it’s crucial to verify the suitability of a motor base for a specific orientation by referring to the manufacturer’s guidelines.
editor by CX 2024-03-15