Functions
- 14 Pole hello-torque motor design and style Precision engineered for greatest strength conversion Precision well balanced rotor, smoothness for greatest reliability and highest RPM
- Several safety features: Low voltage reduce-off protection, over-warmth protection, throttle signal reduction safety
- Lengthy stable functionality: No error time lasts prolonged for 2700 hrs at 24V voltage and 60A current functioning conditions.
- Fulfill National Army common, EMC, FCC,CE and so on.
- Suitable for industrial and specialised drones( Multi-rotor, set wings drones)
- Shaft: High hardness, prolonged lifespan( Special stainless steel)
- Housing: 7075 collection aerial specialist higher hardness aluminum alloy, a lot more costly than the 6000 sequence with low alloy hardness and the screw simple to unfastened.
- Magnet: particular long term magnet with excellent efficiency and special warmth resistance.
- Coil: High purity copper windings maximizes efficiency CZPTed from Japan with excellent performance, substantial warmth resistance Adopt vertical varnish technologies to make the wire thickness even
- Bering: CZPTed(Not-refurbished)
- Iron core: CZPTed, distinctive silicon steel sheet.
KWT-BLDC50 Series Φ58.6×31.seven 180W/360W
Motor Parameter | KWTBLDC | KWTBLDC | ||
Motor Product | 5571C6S | 5571C12S | ||
Values at nominal voltage | ||||
Rated voltage | V | 22.2 | 44.four | |
Free of charge Load | No load speed | rpm | 6770 | 6036 |
No load present | A | .80 | .33 | |
At Max. Efficiency | Max. Performance | % | 89.50% | ninety one.10% |
Speed | rpm | 6464 | 5792 | |
Existing | A | seventeen | 8 | |
Torque | N.m | .50 | .fifty three | |
At Max.Output | Max .Output | W | 1951.59 | 2075.64 |
Speed | rpm | 3385 | 3018 | |
Existing | A | 179.forty three | 94.sixty four | |
Torque | N.m | 5.5 | 6.56 | |
At Stall | Stall current | A | 358 | 189 |
Stall torque | N.m | 11 | 13 | |
Motor characteristic | ||||
Terminal resistance | mΩ | eighty | 300 | |
Torque continual | g.cm/A | 314.5 | 710 | |
KV | rpm/V | 306 | 136 | |
Speed/Torque continuous | rpm/g.cm | .06 | .05 |